“sae556”通过精心收集，向本站投稿了15篇电子工程类英文简历，下面是小编帮大家整理后的电子工程类英文简历，欢迎阅读，希望大家能够喜欢。
篇1：电子工程英文简历
电子工程英文简历
Sandy Lin 15/F,TOWER2 ,BRIGHT CHINA,BUILDING1,BEIJING.
BACKGROUND SUMMARY
Over eleven years of extensive computer/electronics experience.Versed in both digital and analog electronics withspecific emphasis on computer hardware/software.Special expertise in system and component evaluation.Network supervisor responsible for installing/maintaining Arcnet LAN system.Proficient in assembly and C programming languages.Excelent communication skills including written,verbal and interpersonal.
PROFESSIONAL WORK EXPERIENCE
Stevenson Data Systems,Los Angeles,CA 20xx- 20xx
Components Evaluation Engineer 20xx- 20xx
Responsible for the characterization and evaluation of, and approved vendors list for:Power supplies,oscillators,crystals,and programmable logic used in desktop and laptop computers.Evaluated and recommended quality components that increased product profitability.Created adn developed power supply test plan used for evqluating third party power supplies.Interacted with vendors to resolve problems associated with components qualification.Technical advisor for Purchasing.Promoted to engineer II.
Design Evaluation Engineer 20xx- 20xx
Evaluated new computer product designs ,solving environmental problems on prototype computers.Conducted systems analysis on new computer profucts to ensure hardware,software and mechanical design integrity.Designed hardware and software for PC,ISA bus programmable load board used for environmental testing.Performed reliability lift testing on computer systems.Installed/maintained 20 user.Novell,Arcnet LAN system.Examined system and sub-system susceptibility to electrostatic discharge in order to meet IEC-801-2 industry standards.Analyzed complete power and load of computer system and subsystem to verify power and load estimations.
Assistant Engineer 20xx- 20xx
Performed extensive hardware evaluation ion prototype computers,tested prototype units for timing violation using the latest state-of-the-art test equipment,digital oscilloscopes and logic analyzers.Performed emvironmental,ESD and acoustic testing.Designed and built a power-up test used to test prototype computers during cold boot.
EDUCATION
Bachelor of Science in Electrical Engineering
--University of Southern California 20xx
Associate in Engineering Electronics
--University of Southern California 20xx
Job descriptions emphasize candidates accomploshments.
Work history is stated in reverse chronological order,with most recent employment listed first.
篇2：工程类英文简历
工程类英文简历模板
Sandy Lin 15/F,TOWER2 ,BRIGHT CHINA,BUILDING1,BEIJING.
PROFESSIONAL EXPERIENCE
1985-Present LEYNER CORPORATION,Lake Charles,LA
Industrial Engineer
Provide floor support engineering in printed wire assembly (PWA) and subsystem assembly (SSA) areas.
Purchase capital equipment.Interface with vendors. Justify expenditures.
Design plant layout fixtures,and flow charts of material.
Program automatic equipment.
Write process sheets and rework procedures.
Recommend changes to product to allow ease of manufacture.
Implement design changes.Inititate methods and process improvements.
Troubleshoot problems.Effect disposition or rejection of material.
Provide assistance to all other departments.
1984 PRUDENCE D. MCHARRISON LABORATORY,Ruston,LA
Engineering Assistant
Conducted variety of tests including Tensile.Compression,and creep tests on molded parts.
Responsible for production of plastic test specimens,and mounting polishing,and microscopic analysis.
Designed tools and fixtures for Instron machine.
1982/83 DUCHESS COMPONENTS,Baton Rouge,LA
Molding Room Attendant,1983
Operated and maintained machine producing epoxy preforms.
Maintained records on inventory,loss of material,and quality control.
Machine shop attendant,1982
Operated lathes,milling and grinding machines;monitored welding and heat treatments.
Read blueprints.
EDUCATION
LOYOLA UNIVERSITY AT NEW ORLEANS,College of Engineering,New Orleans,LA
Bachelor of Science Degree in Industrial Technology,1985
Minor concentration in computer science.
PROFESSIONAL AFFILIATIONS/CERTIFICATIONS
Member,Society of Manufacturing Engineers,Leaner Management Club Certified Manufacturing Technologist and Solderer.
篇3：英文简历 机械电子工程
英文简历样本 机械电子工程
Personal Information: | ||||
Name | Gender | Male | ||
Nationality | Han | Native Place | Anqing, AnHui Province | |
Academic degree level | Master | Political status | CPC member | |
Hukou | WuHan, HuBei Province | Date of Birth | 1980/10 | |
Marital status | Single | Health condition | Excellent | |
Education | WuHan Universityof Science and Technology | Tel | （0）13871329254 | |
English Level | CET-6 | IT | Nationwide Computer Level Test Band 2 | |
Major | Mechanical electronic engineering | wust@yahoo.com.cn | ||
9184482 | Blog | heyrose.bokee.com | ||
Address | Fluid Lab, Collegeof Machineand Automation, Universityof ScienceAnd Technology, Wuhan, 430081 | |||
Scientific research experience and achievement： | ||||
1．Feb,—Now National Natural Science Fund Project――The energy extraction and engineering research of proportion pressure control of the underpit sagging drills hydraulic system, in charge of Multi-field coupling analysis and architecture model simulation of the system. | ||||
2．Mar,2006---Apr,2006 In charge of the transformation of FS79Z-100C(SM) dried noodles automatic formation hydraulic press in Fireproof Metallurgy Medicinal powder Factory of Wuhan Steel Corporation. | ||||
3．Jul, ---Oct, 2005 Participate in hydraulic pressure AGC project in Rolled Plate Factory of Wuhan Steel Corporation, using configuration software--- Simens wincc Software ---to carry on the layout monitoring contact surface, completing the debugging of the procedure and using simulation software AMESim of French AME Company to carry on the module simulation. | ||||
4．Aug, 2005---May, 2006 Participate in transformation project of hydraulic system of 1700 rolling roughing mill in Hot rolling Factory of Wuhan Steel Corporation, completing the design of hydraulic system and part shaping. | ||||
All the achievements are on show in my personal Blog (heyrose.bokee.com) | ||||
The adopted articles ： 《Application of The Pro/Engineer In Hydraulic Valve Block Design》，MACHINE TOOL & HYDRAULICS（Core）Jan,2007； 《The application of BP neural network in labview》，MACHINERY(Core) Jul,2006； | ||||
1.The topic of Bachelor graduation thesis： 《Utilization of Ansys simulation software in compound materials》 | ||||
2. The topic of Master graduation thesis： 《The research of the energy extraction of the underpit sagging drills hydraulic system》－（P.s.Tentative） | ||||
Self Assessment： | ||||
1、Use CAXA and AUTOCAD skillfully and have applied them to the transformation project of hydraulic system of 1700 rolling roughing mill in Hot rolling Factory of Wuhan Steel Corporation. 2、Use Pro/E skillfully and have applied them to the projects of Fireproof Metallurgy Medicinal powder Factory and Hot rolling Factory of Wuhan Steel Corporation. 3、Use fluid simulation software --- FLUENT and Ansys skillfully and have applied them to the National Natural Science Fund Project. 4、Use SIEMENS S7-300 and WINCC skillfully and have applied them to the project of Fireproof Metallurgy Medicinal powder Factory and hydraulic pressure AGC project. 5、Be able to program using the VC++ higher order language and have applied it to the hydraulic pressure AGC Project. 6、Be able to use the Simulation software---AMEsim and have applied it to hydraulic pressure AGC project in Rolled Plate Factory. | ||||
I think you can get more information in my personal Blog if you want to do it. |
篇4：机械电子工程英文简历
英文简历是使用英文写的简历。英文简历(resume)并无固定不变的单一形式，应聘者完全可以根据个人的具体情况来确定采用何种形式，灵活设计。
RESUME
No.67, Lane110, Job Road, Job District, Shanghai, China
(+86) 138-0013-XXXX
CNrencai Objective: Mechanical Design Engineer
EDUCATION
University of Pennsylvania
School of Engineering and Applied Science
Philadelphia, PA
Candidate for Bachelor of Science in Engineering
May
Major:
Mechanical Engineering & Applied Mechanics
Cumulative GPA:
3.33/4.00
Minor:Mathematics
Current Coursework: Mechanics of Solids, Probability, Vibration of Mechanical Systems
Senior Design Project: Design and build a pressure and heat sensitive wrist support pad for keyboards to improve comfort and decrease ailments such as carpal tunnel syndrome.
COMPUTER SKILLS
Expedition, Buzzsaw, Pro/Engineer 3D Modeling, SolidWorks, AutoCad, MathCAD, MatLab, C++, Java, Microsoft Office
WORK EXPERIENCE
LF Driscoll
AtlantiCare Regional Medical Center Projec, Atlantic City, NJ
Summer - Present
Student Intern
•Process project documents and drawings to ensure accuracy and consistency among all trades.
•Assist Senior Project Manager with billing and monthly budget reports tracking and monitoring expenditures.
•Oversee and report to Senior Project Manager on the daily progress of steel erection.
L-3 Communications
Communications Systems-East, Camden, NJ
Summer
Summer Intern, Technical
•Developed a mathematical model to simulate life spans of solder joints on circuit boards aboard military aircraft.
•Designed and modeled the electronic packaging for secure wireless equipment.
•Received a secret level security clearance.
Lockheed Martin
Maritime Systems and Sensors, Moorestown, NJ
Summer 20XX
College Student Tech
•Assisted a head engineer in the analysis of telecommunication equipment.
•Used proprietary software to make drawing changes as directed.
•Identified a listing of specified technical equipment for the Navy and compiled the data using modeling software.
HONORS and ACTIVITIES
University of Pennsylvania:
Alpha Chi Rho Fraternity - House Manager , Habitat for Humanity, Society of Automotive Engineers - Student Chapter
Crosstown High School:
United States Senate Scholarship Nominee, Honors Physics Award, Varsity Track Athlete,Student Leadership and Service
VOLUNTEER WORK
New Jersey Association of Student Councils Leadership Training Conference
Junior Counselor (, , 2011, 2012) Administrative Assistant (2007)
•Counselor to middle and high school students.
•Mentored participants in development of student government and leadership skills.
PERSONAL
Interests include playing guitar, cycling, football, and other outdoor activities. Self-funding over 50% of tuition through employment, grants and loans. Enjoy woodworking and furniture building. Scuba Diving Certification
篇5：电子工程专业英文简历
电子工程专业英文简历
BACKGROUND SUMMARYOver eleven years of extensive computer/electronics experience.Versed in both digital and analog electronics withspecific emphasis on computer hardware/software.Special expertise in system and component evaluation.Network supervisor responsible for installing/maintaining Arcnet LAN system.Proficient in assembly and C programming languages.Excelent communication skills including written,verbal and interpersonal.
PROFESSIONAL WORK EXPERIENCE
Stevenson Data Systems,Los Angeles,CA 1981-1993
Components Evaluation Engineer 1992-1993
Responsible for the characterization and evaluation of, and approved vendors list for:Power supplies,oscillators,crystals,and programmable logic used in desktop and laptop computers.Evaluated and recommended quality components that increased product profitability.Created adn developed power supply test plan used for evqluating third party power supplies.Interacted with vendors to resolve problems associated with components qualification.Technical advisor for Purchasing.Promoted to engineer II.
Design Evaluation Engineer 1990-1992
Evaluated new computer product designs ,solving environmental problems on prototype computers.Conducted systems analysis on new computer profucts to ensure hardware,software and mechanical design integrity.Designed hardware and software for PC,ISA bus programmable load board used for environmental testing.Performed reliability lift testing on computer systems.Installed/maintained 20 user.Novell,Arcnet LAN system.Examined system and sub-system susceptibility to electrostatic discharge in order to meet IEC-801-2 industry standards.Analyzed complete power and load of computer system and subsystem to verify power and load estimations.
Assistant Engineer 1981-1990
Performed extensive hardware evaluation ion prototype computers,tested prototype units for timing violation using the latest state-of-the-art test equipment,digital oscilloscopes and logic analyzers.Performed emvironmental,ESD and acoustic testing.Designed and built a power-up test used to test prototype computers during cold boot.
EDUCATION
Bachelor of Science in Electrical Engineering
--University of Southern California 1990
Associate in Engineering Electronics
--University of Southern California 1981
Job descriptions emphasize candidate's accomploshments.
Work history is stated in reverse chronological order,with most recent employment listed first.
篇6：大学生 英文简历:机械电子工程
| Personal Information: | ||||
| Name |  | Gender | Male | |
| Nationality | Han | Native Place | Anqing, AnHui Province | |
| Academic degree level | Master | Political status | CPC member | |
| Hukou | WuHan,HuBei Province | Date of Birth | 1980/10 | |
| Marital status | Single | Health condition | Excellent | |
| Education | WuHan University of Science and Technology | Tel | （0）13871329254 | |
| English Level | CET-6 | IT | Nationwide Computer Level Test Band 2 | |
| Major | Mechanical electronic engineering | wust@yahoo.com.cn | ||
| 9184482 | Blog | heyrose.bokee.com | ||
| Address | Fluid Lab,College of Machine and Automation,Wuhan University of Science And Technology,Wuhan, 430081 | |||
| Scientific research experience and achievement： | ||||
| 1．Feb,—Now National Natural Science Fund Project――The energy extraction and engineering research of proportion pressure control of the underpit sagging drills hydraulic system, in charge of Multi-field coupling analysis and architecture model simulation of the system. | ||||
| 2．Mar,2006---Apr,2006 In charge of the transformation of FS79Z-100C(SM) dried noodles automatic formation hydraulic press inFireproof Metallurgy Medicinal powder Factory of Wuhan Steel Corporation. | ||||
| 3．Jul, ---Oct, 2005 Participate in hydraulic pressure AGC project in Rolled Plate Factory of Wuhan Steel Corporation, using configuration software--- Simens wincc Software ---to carry on the layout monitoring contact surface, completing the debugging of the procedure and using simulation software AMESim of French AME Company to carry on the module simulation. | ||||
| 4．Aug, 2005---May, 2006 Participate in transformation project of hydraulic system of 1700 rolling roughing mill in Hot rolling Factory of Wuhan Steel Corporation, completing the design of hydraulic system and part shaping. | ||||
| All the achievements are on show in my personal Blog (heyrose.bokee.com) | ||||
| The adopted articles ：《Application of The Pro/Engineer In Hydraulic Valve Block Design》，MACHINE TOOL & HYDRAULICS（Core）Jan,2007；《The application of BP neural network in labview》，MACHINERY(Core) Jul,2006； | ||||
| 1.The topic of Bachelor graduation thesis： 《Utilization of Ansys simulation software in compound materials》 | ||||
| 2. The topic of Master graduation thesis： 《The research of the energy extraction of the underpit sagging drills hydraulic system》－（P.s.Tentative） | ||||
| Self Assessment： | ||||
| 1、Use CAXA and AUTOCAD skillfully and have applied them to the transformation project of hydraulic system of 1700 rolling roughing mill in Hot rolling Factory of Wuhan Steel Corporation.2、Use Pro/E skillfully and have applied them to the projects of Fireproof Metallurgy Medicinal powder Factory and Hot rolling Factory of Wuhan Steel Corporation.3、Use fluid simulation software --- FLUENT and Ansys skillfully and have applied them to the National Natural Science Fund Project. 4、Use SIEMENS S7-300 and WINCC skillfully and have applied them to the project of Fireproof Metallurgy Medicinal powder Factory and hydraulic pressure AGC project.5、Be able to program using the VC++ higher order language and have applied it to the hydraulic pressure AGC Project.6、Be able to use the Simulation software---AMEsim and have applied it to hydraulic pressure AGC project in Rolled Plate Factory. | ||||
| I think you can get more information in my personal Blog if you want to do it. |
篇7：机械电子工程英文简历表格
机械电子工程英文简历表格
在不知不觉中，简历便已经出现了误区，只不过当局者迷的求职者还没有发现罢了，这便是为什么经过较长时间的求职，工作依旧那么难找的原因。谈及简历中那些比较常见的创作误区，它一般会表现在陈述上，性格比较自负的求职者，很容易因为陈述言辞无法令招聘企业满意的缘故，而导致简历的递交，只能如一张即将丢进垃圾桶的废纸，毫无用途可言。
能够在简历中找到不足之处，并且对此加以改正，无论从哪一点来看，都要比那些不知道错在哪里的求职者更容易增进就职的成功率。职场本身便是异常看不到硝烟的竞争赛场，而简历就是自己的一张名片，即便只是一点细微差错的出现，也很有可能导致求职效果大幅降低。找寻简历误区的`小方法其实非常简单，我们只要多多观察招聘方剔除的用人需求，并且对此进行稍微了解一些，便可以打造出极具价值的简历出来，即便进行了这般创作后，简历的使用效果也不会有所降低。
以下是yjbys小编和大家分享的机械电子工程英文简历表格，更多资料请点击(/jianli)。
|
篇8：大学生 英文简历:机械电子工程
Personal Information:
Name
Gender
Male
Nationality
Han
Native Place
Anqing,
AnHui Province
Academic degree level
Master
Political status
CPC member
Hukou
WuHan,
HuBei Province
Date of Birth
1980/10
Marital status
Single
Healthcondition
Excellent
Education
WuHan University of Science and Technology
Tel
（0）13871329254
English Level
CET-6
IT
Nationwide com#puter Level Test Band 2
Major
Mechanical electronic engineering
wust@yahoo.com#.cn
9184482
Blog
heyrose.bokee.com#
Address
Fluid Lab,College of Machine and Automation,Wuhan University of Science And Technology,Wuhan, 430081
Scientific research experience and achievement：
1．Feb,―Now
National Natural Science Fund ProjectDDThe energy extraction and engineering research of proportion pressure control of the underpit sagging drills hydraulic system, in charge of Multi-field coupling analysis and architecture model simulation of the system.
2．Mar,2006---Apr,2006
In charge of the transformation of FS79Z-100C(SM) dried noodles automatic formation hydraulic press in
Fireproof Metallurgy Medicinal powder Factory of Wuhan Steel Corporation.
3．Jul, ---Oct, 2005
Participate in hydraulic pressure AGC project in Rolled Plate Factory of Wuhan Steel Corporation, using configuration software--- Simens wincc Software ---to carry on the layout monitoring contact surface, com#pleting the debugging of the procedure and using simulation software AMESim of French AME com#pany to carry on the module simulation.
4．Aug, 2005---May, 2006
Participate in transformation project of hydraulic system of 1700 rolling roughing mill in Hot rolling Factory of Wuhan Steel Corporation, com#pleting the design of hydraulic system and part shaping.
All the achievements are on show in my personal Blog (heyrose.bokee.com#)
The adopted articles ：
《Application of The Pro/Engineer In Hydraulic Valve Block Design》，MACHINE TOOL & HYDRAULICS（Core）Jan,2007；
《The application of BP neural network in labview》，MACHINERY(Core) Jul,2006；
1.The topic of Bachelor graduation thesis：
《Utilization of Ansys simulation software in com#pound materials》
2. The topic of Master graduation thesis：
《The research of the energy extraction of the underpit sagging drills hydraulic system》－（P.s.Tentative）
Self Assessment：
1、Use CAXA and AUTOCAD skillfully and have applied them to the transformation project of hydraulic system of
1700 rolling roughing mill in Hot rolling Factory of Wuhan Steel Corporation.
2、Use Pro/E skillfully and have applied them to the projects of Fireproof Metallurgy Medicinal powder Factory and
Hot rolling Factory of Wuhan Steel Corporation.
3、Use fluid simulation software --- FLUENT and Ansys skillfully and have applied them to the National Natural
Science Fund Project.
4、Use SIEMENS S7-300 and WINCC skillfully and have applied them to the project of Fireproof Metallurgy
Medicinal powder Factory and hydraulic pressure AGC project.
5、Be able to program using the VC++ higher order language and have applied it to the hydraulic pressure AGC
Project.
6、Be able to use the Simulation software---AMEsim and have applied it to hydraulic pressure AGC project in Rolled
Plate Factory.
I think you can get more information in my personal Blog if you want to do it.
篇9：机械电子工程大学生英文简历
RESUME
No.67, Lane110, Job Road, Job District, Shanghai, China
(+86) 138-0013-XXXX
CNrencai Objective: Mechanical Design Engineer
EDUCATION
University of Pennsylvania
School of Engineering and Applied Science
Philadelphia, PA
Candidate for Bachelor of Science in Engineering
May
Major:
Mechanical Engineering & Applied Mechanics
Cumulative GPA:
3.33/4.00
Minor:Mathematics
Current Coursework: Mechanics of Solids, Probability, Vibration of Mechanical Systems
Senior Design Project: Design and build a pressure and heat sensitive wrist support pad for keyboards to improve comfort and decrease ailments such as carpal tunnel syndrome.
COMPUTER SKILLS
Expedition, Buzzsaw, Pro/Engineer 3D Modeling, SolidWorks, AutoCad, MathCAD, MatLab, C++, Java, Microsoft Office
WORK EXPERIENCE
LF Driscoll
AtlantiCare Regional Medical Center Projec, Atlantic City, NJ
Summer - Present
Student Intern
Process project documents and drawings to ensure accuracy and consistency among all trades.
Assist Senior Project Manager with billing and monthly budget reports tracking and monitoring expenditures.
Oversee and report to Senior Project Manager on the daily progress of steel erection.
L-3 Communications
Communications Systems-East, Camden, NJ
Summer
Summer Intern, Technical
Developed a mathematical model to simulate life spans of solder joints on circuit boards aboard military aircraft.
Designed and modeled the electronic packaging for secure wireless equipment.
Received a secret level security clearance.
Lockheed Martin
Maritime Systems and Sensors, Moorestown, NJ
Summer 20XX
College Student Tech
Assisted a head engineer in the analysis of telecommunication equipment.
Used proprietary software to make drawing changes as directed.
Identified a listing of specified technical equipment for the Navy and compiled the data using modeling software.
HONORS and ACTIVITIES
University of Pennsylvania:
Alpha Chi Rho Fraternity - House Manager , Habitat for Humanity, Society of Automotive Engineers - Student Chapter
Crosstown High School:
United States Senate Scholarship Nominee, Honors Physics Award, Varsity Track Athlete,Student Leadership and Service
VOLUNTEER WORK
New Jersey Association of Student Councils Leadership Training Conference
Junior Counselor (, , 2011, 2012) Administrative Assistant (2007)
Counselor to middle and high school students.
Mentored participants in development of student government and leadership skills.
PERSONAL
Interests include playing guitar, cycling, football, and other outdoor activities. Self-funding over 50% of tuition through employment, grants and loans. Enjoy woodworking and furniture building. Scuba Diving Certification
篇10：应届毕业生英文简历:机械电子工程
应届毕业生英文简历样本:机械电子工程
| Personal Information: | ||||
| Name | Gender | Male | ||
| Nationality | Han | Native Place | Anqing,AnHui Province | |
| Academic degree level | Master | Political status | CPC member | |
| Hukou | WuHan,HuBei Province | Date of Birth | 1980/10 | |
| Marital status | Single | Health condition | Excellent | |
| Education | WuHan University of Science and Technology | Tel | （0）13871329254 | |
| English Level | CET-6 | IT | Nationwide Computer Level Test Band 2 | |
| Major | Mechanical electronic engineering | wust@yahoo.com.cn | ||
| 9184482 | Blog | heyrose.bokee.com | ||
| Address | Fluid Lab,College of Machine and Automation,Wuhan University of Science And Technology,Wuhan, 430081 | |||
| Scientific research experience and achievement： | ||||
| 1． Feb,—Now National Natural Science Fund Project――The energy extraction and engineering research of proportion pressure control of the underpit sagging drills hydraulic system, in charge of Multi-field coupling analysis and architecture model simulation of the system. | ||||
| 2． Mar,2006---Apr,2006In charge of the transformation of FS79Z-100C(SM) dried noodles automatic formation hydraulic press inFireproof Metallurgy Medicinal powder Factory of Wuhan Steel Corporation. | ||||
| 3．Jul, ---Oct, 2005 Participate in hydraulic pressure AGC project in Rolled Plate Factory of Wuhan Steel Corporation, using configuration software--- Simens wincc Software ---to carry on the layout monitoring contact surface, completing the debugging of the procedure and using simulation software AMESim of French AME Company to carry on the module simulation. | ||||
| 4． Aug, 2005---May, 2006 Participate in transformation project of hydraulic system of 1700 rolling roughing mill in Hot rolling Factory of Wuhan Steel Corporation, completing the design of hydraulic system and part shaping. | ||||
| All the achievements are on show in my personal Blog (heyrose.bokee.com) | ||||
| The adopted articles ：《Application of The Pro/Engineer In Hydraulic Valve Block Design》，MACHINE TOOL & HYDRAULICS（Core）Jan,2007；《The application of BP neural network in labview》，MACHINERY(Core) Jul,2006； | ||||
| 1. The topic of Bachelor graduation thesis： 《Utilization of Ansys simulation software in compound materials》 | ||||
| 2. The topic of Master graduation thesis：《The research of the energy extraction of the underpit sagging drills hydraulic system》－（P.s.Tentative） | ||||
| Self Assessment： | ||||
| 1、 Use CAXA and AUTOCAD skillfully and have applied them to the transformation project of hydraulic system of1700 rolling roughing mill in Hot rolling Factory of Wuhan Steel Corporation.2、 Use Pro/E skillfully and have applied them to the projects of Fireproof Metallurgy Medicinal powder Factory and Hot rolling Factory of Wuhan Steel Corporation.3、 Use fluid simulation software --- FLUENT and Ansys skillfully and have applied them to the National Natural Science Fund Project. 4、 Use SIEMENS S7-300 and WINCC skillfully and have applied them to the project of Fireproof MetallurgyMedicinal powder Factory and hydraulic pressure AGC project.5、 Be able to program using the VC++ higher order language and have applied it to the hydraulic pressure AGC Project.6、 Be able to use the Simulation software---AMEsim and have applied it to hydraulic pressure AGC project in RolledPlate Factory. | ||||
| I think you can get more information in my personal Blog if you want to do it. |
篇11：工程类应聘电子简历
工程类应聘电子简历模板
个人简历是给用人单位的招聘官看的，首先给对方的印象就是个人简历的外贸以及其格式。个人简历的格式不仅关系到整体的形象，也关系到简历的阅读性。
个人信息
yjbys
性 别： 男
民 族： 汉族 年 龄： 29
婚姻状况： 保密 专业名称： 土木工程
主修专业： 土建类 政治面貌： 其他
最高学历： 本科 电脑水平： 良好
工作经验： 四年以上 身 高： 176 cm 体重：70公斤
现所在地： 新罗区 户 籍： 新罗区
求职意向
期望从事职业： 工程类 期望薪水： 面议
期望工作地区： 新罗区 期望工作性质： 全职
教育/培训
教育背景：
学校名称： 福建工程学院 ( 20xx年9月 - 20xx年7月 )
专业名称： 土木工程 学历： 本科
所 在 地： 福州 证书：
培训经历：
培训机构： 资格考试中心 ( 20xx年5月 - 20xx年6月 )
课程名称： 执业资格考试 证书： 建筑工程 二级建造师执业资格证书
工作经验
公司名称： 锦宸集团有限公司 ( 20xx年6月 - 20xx年6月 )
所属行业： 房地产开发·建筑与工程·服务(中介·物业·监理·设计) 公司性质： 股份制企业
公司规模： 500～1000人 工作地点： 厦门
职位名称： 工程投标
工作描述： 电子标 、纸质标文件的编制
公司名称： 新加坡金鹰集团 ( 20xx年7月 - 20xx年5月 )
所属行业： 房地产开发·建筑与工程·服务(中介·物业·监理·设计) 公司性质： 外商独资.外企办事处
公司规模： 1000人以上 工作地点： 莆田
职位名称： 施工员
工作描述： 跟踪厂内宿舍楼施工进度，配合施工方完成工程联系单等任务
自我评价
自我评价： 肯干、踏实
语言能力
语种名称 掌握程度
英语 良好
普通话 精通
拓展阅读：令招聘官喜欢的个人简历特点
在求职的过程中影响求职成功的因素有很多，个人简历的质量以及简历的投递就是其影响因素之一。个人简历写的好，并在适当的时候投递出去，就能发挥其作用，从而获得面试的机会。有了面试的`机会，则求职成功才有机会。那么求职者应聘大企业部门简历要怎么写呢?需要先了解招聘官们喜欢什么样的简历，然后投其所好。
(1)，精炼性的个人简历
几乎所有的招聘官在对个人简历的要求上都有“简洁”、“明了”、“清晰”等形容词，说明精炼性的个人简历最受欢迎，简历写的清晰明了，可以让招聘官更好的阅读，也便于从中提取有用的信息。
(2)，真诚的简历
有些求职者喜欢在个人简历的表面上下功夫，将简历做的特别花哨，这样似乎很美观，但是大多数招聘官都不喜欢花哨的简历。因为国语花哨的简历显得不够真实，会令简历的信任度降低。招聘官多是喜欢真诚的个人简历，能够让对方信服才更能体现简历的价值。
(3)，有重点的个人简历
不少应届毕业生们忙于找工作，为了更有把握学习各种编写个人简历的技巧，最终花费很长时间写的简历因为没有重点而被拒绝。在一份个人简历中一定要能让对方知道你的优势在哪，你的能力有哪些，你的求职目标是什么，招聘官一般都偏爱有重点的简历。
以上是多数招聘官普遍认可的简历类型，一份个人简历上要表达的是求职者该做的事，而不是不该做，简单直接的简历效果最好。
篇12：食品科学与工程类英文简历
Basic CV
Name: xxx nationality: China
Current location: Foshan National: Han
Exit and Entry: Henan tall: 168 cm ? 50 kg
Marital Status: Single Age: 26 years old
Training Certification: integrity badge:
Job search intention and work experience
Talent type: ? graduates
Position: Quality Management / Test Manager (QA / QC Manager): R & D, quality inspection, such as light industry or type of teachers college counselors detect light category management
Work Experience: 0 Title: No Title
Job type: full-time can be reported for duty - at any time
Monthly requirements: 3500 - 5000 hope that the working area: Guangzhou, Foshan, Guangdong Province
Personal work experience: summer promotional紫荆山Food Stores
July Swire Coca-Cola Co., Ltd., Zhengzhou, visit internship
Summer 2004, Hebi City State Grain Reserve in social practice
Curriculum design in was an excellent basis for mechanical design
June 2003 young volunteers to participate in large-scale activities
Xinyuan Hotel 2003 summer work-study program
Machinery Factory in practice run
Summer 2002 promotion, “Congress,” the spirit of the countryside activities
Luohe summer interns to visit a food factory
Educational background
Graduate institutions: Henan University of Technology
The highest academic qualifications: Master's graduation - -06-01
Studies by one: the Food Science and Engineering Science II:
Experienced by the education and training: September 2001 --- June 2005 studying at the University of Henan Cereals, Oils & Foodstuffs College, by degree;
While studying at the school has been serving as student leaders, have served as members of the class learning, organizational members, female members of the Department, Deputy Minister of Students, such as life, outstanding performance.
September 2005 - June 2008 Graduate School of Henan University of Reading, was a master's degree. Graduate school will be served the post of Director of the Office. During the six papers, of which the core 3.
Language ability
Foreign Language: English Excellent
Mandarin level: the level of fine Cantonese: General
The ability to work and other expertise
I am in school during the period, has been serving as student leaders, have served as members of the class learning, organization members, women members, the Minister of the Department of Student life, will be director of the Office of Graduate school, etc., stand out.
During the third class received scholarships to study three times, twice a second-class scholarship; information was excellent, and outstanding student leaders, youth volunteers, Zhengzhou Museum obligation to guide and so on, the hospital fun Games long jump, throwing the third such award;
Graduate students during the six papers, of which three core journals.
English proficiency
Has strong listening, speaking, reading, writing and translation capabilities; to basic communication in English. Familiar with the science and technology in English, to a written English translation of some articles.
Computer level
Familiar with the basic knowledge of computer networks and basic operation, can be skillfully applied a variety of Windows operating system and office software such as Word, Excel, Powerpoint and so on, will use computer graphics AutoCAD will use Visual Basic language, database, such as simple programming language. And through the National Computer II
Hobbies: badminton, table tennis, reading, etc.
Detailed personal autobiography
I have a sense of responsibility, and hard hard-working, down-to-earth seriously, aggressive self-confidence, perseverance, innovative; have some organizational skills, activity planning and communication skills. However, experience to be further strengthened and enhanced!
Personal Contact
篇13：食品科学与工程类英文简历
Name: xxx nationality: China
Current location: Foshan National: Han
Exit and Entry: Henan tall: 168 cm ? 50 kg
Marital Status: Single Age: 26 years old
Training Certification: integrity badge:
Job search intention and work experience
Talent type: ? graduates
Position: Quality Management / Test Manager (QA / QC Manager): R & D, quality inspection, such as light industry or type of teachers college counselors detect light category management
Work Experience: 0 Title: No Title
Job type: full-time can be reported for duty - at any time
Monthly requirements: 3500 - 5000 hope that the working area: Guangzhou, Foshan, Guangdong Province
Personal work experience: summer 2005 promotional紫荆山Food Stores
July 2004 Swire Coca-Cola Co., Ltd., Zhengzhou, visit internship
Summer 2004, Hebi City State Grain Reserve in social practice
Curriculum design in 2003 was an excellent basis for mechanical design
June 2003 young volunteers to participate in large-scale activities
Xinyuan Hotel 2003 summer work-study program
Machinery Factory in 2002 practice run
Summer 2002 promotion, “Congress,” the spirit of the countryside activities
Luohe 2001 summer interns to visit a food factory
Educational background
Graduate institutions: Henan University of Technology
The highest academic qualifications: Master's graduation - 2008-06-01
Studies by one: the Food Science and Engineering Science II:
Experienced by the education and training: September 2001 --- June 2005 studying at the University of Henan Cereals, Oils & Foodstuffs College, by degree;
While studying at the school has been serving as student leaders, have served as members of the class learning, organizational members, female members of the Department, Deputy Minister of Students, such as life, outstanding performance.
September 2005 - June 2008 Graduate School of Henan University of Reading, was a master's degree. Graduate school will be served the post of Director of the Office. During the six papers, of which the core 3.
Language ability
Foreign Language: English Excellent
Mandarin level: the level of fine Cantonese: General
The ability to work and other expertise
I am in school during the period, has been serving as student leaders, have served as members of the class learning, organization members, women members, the Minister of the Department of Student life, will be director of the Office of Graduate school, etc., stand out.
During the third class received scholarships to study three times, twice a second-class scholarship; information was excellent, and outstanding student leaders, youth volunteers, Zhengzhou Museum obligation to guide and so on, the hospital fun Games long jump, throwing the third such award;
Graduate students during the six papers, of which three core journals.
English proficiency
Has strong listening, speaking, reading, writing and translation capabilities; to basic communication in English. Familiar with the science and technology in English, to a written English translation of some articles.
Computer level
Familiar with the basic knowledge of computer networks and basic operation, can be skillfully applied a variety of Windows operating system and office software such as Word, Excel, Powerpoint and so on, will use computer graphics AutoCAD2000 will use Visual Basic language, database, such as simple programming language. And through the National Computer II
Hobbies: badminton, table tennis, reading, etc.
Detailed personal autobiography
I have a sense of responsibility, and hard hard-working, down-to-earth seriously, aggressive self-confidence, perseverance, innovative; have some organizational skills, activity planning and communication skills. However, experience to be further strengthened and enhanced!
Personal Contact
篇14： 电子工程师英文简历
电子工程师英文简历范例
BACKGROUND SUMMARY
Over eleven years of extensive computer/electronics experience.Versed in both digital and analog electronics withspecific emphasis on computer hardware/software.Special expertise in system and component evaluation.Network supervisor responsible for installing/maintaining Arcnet LAN system.Proficient in assembly and C programming languages.Excelent communication skills including written,verbal and interpersonal.
PROFESSIONAL WORK EXPERIENCE
Stevenson Data Systems,Los Angeles,CA 1981-1993
Components Evaluation Engineer 1992-1993
Responsible for the characterization and evaluation of, and approved vendors list for:Power supplies,oscillators,crystals,and programmable logic used in desktop and laptop computers.Evaluated and recommended quality components that increased product profitability.Created adn developed power supply test plan used for evqluating third party power supplies.Interacted with vendors to resolve problems associated with components qualification.Technical advisor for Purchasing.Promoted to engineer II.
Design Evaluation Engineer 1990-1992
Evaluated new computer product designs ,solving environmental problems on prototype computers.Conducted systems analysis on new computer profucts to ensure hardware,software and mechanical design integrity.Designed hardware and software for PC,ISA bus programmable load board used for environmental testing.Performed reliability lift testing on computer systems.Installed/maintained 20 user.Novell,Arcnet LAN system.Examined system and sub-system susceptibility to electrostatic discharge in order to meet IEC-801-2 industry standards.Analyzed complete power and load of computer system and subsystem to verify power and load estimations.
Assistant Engineer 1981-1990
Performed extensive hardware evaluation ion prototype computers,tested prototype units for timing violation using the latest state-of-the-art test equipment,digital oscilloscopes and logic analyzers.Performed emvironmental,ESD and acoustic testing.Designed and built a power-up test used to test prototype computers during cold boot.
EDUCATION
Bachelor of Science in Electrical Engineering
--University of Southern California 1990
Associate in Engineering Electronics
--University of Southern California 1981
Job descriptions emphasize candidate's accomploshments.
Work history is stated in reverse chronological order,with most recent employment listed first.
篇15：英文简历：电子工程师英文简历
英文简历模板：电子工程师英文简历范例
ELECTRONICS ENGINEER(Experienced)
BACKGROUND SUMMARY
Over eleven years of extensive computer/electronics experience.Versed in both digital and analog electronics withspecific emphasis on computer hardware/software.Special expertise in system and component evaluation.Network supervisor responsible for installing/maintaining Arcnet LAN system.Proficient in assembly and C programming languages.Excelent communication skills including written,verbal and interpersonal.
PROFESSIONAL WORK EXPERIENCE
Stevenson Data Systems,Los Angeles,CA 1981-1993
Components Evaluation Engineer 1992-1993
Responsible for the characterization and evaluation of, and approved vendors list for:Power supplies,oscillators,crystals,and programmable logic used in desktop and laptop computers.Evaluated and recommended quality components that increased product profitability.Created adn developed power supply test plan used for evqluating third party power supplies.Interacted with vendors to resolve problems associated with components qualification.Technical advisor for Purchasing.Promoted to engineer II.
Design Evaluation Engineer 1990-1992
Evaluated new computer product designs ,solving environmental problems on prototype computers.Conducted systems analysis on new computer profucts to ensure hardware,software and mechanical design integrity.Designed hardware and software for PC,ISA bus programmable load board used for environmental testing.Performed reliability lift testing on computer systems.Installed/maintained 20 user.Novell,Arcnet LAN system.Examined system and sub-system susceptibility to electrostatic discharge in order to meet IEC-801-2 industry standards.Analyzed complete power and load of computer system and subsystem to verify power and load estimations.
Assistant Engineer 1981-1990
Performed extensive hardware evaluation ion prototype computers,tested prototype units for timing violation using the latest state-of-the-art test equipment,digital oscilloscopes and logic analyzers.Performed emvironmental,ESD and acoustic testing.Designed and built a power-up test used to test prototype computers during cold boot.
EDUCATION
Bachelor of Science in Electrical Engineering
--University of Southern California 1990
Associate in Engineering Electronics
--University of Southern California 1981
Job descriptions emphasize candidate's accomploshments.
Work history is stated in reverse chronological order,with most recent employment listed first.
